Jumbling Tower Block Christmas Trees
Learn how to turn a box of Jumbling Tower blocks into cute wooden Christmas trees you can decorate and display a part of your holiday decor. This is a fun Christmas craft idea for adults.
Equipment
- Hot Glue Gun
- E6000 Glue
Ingredients
- 1 box Jumbling Tower Blocks
- White Spray Paint
- Small Stars for top of tree
- Ornament for center of tree
- Faux Greenery
Instructions
- Mark 1 inch from the end of 8 blocks (for the smaller tree) or 10 blocks (for the larger tree).
- Using both E6000 and hot glue, glue together two blocks, overlapping to the 1 inch mark. Squeeze blocks together tightly for at least 10 seconds.
- Continue adding overlapping blocks until you have a section 5 or 6 blocks long. Repeat to make a second section. These will be the sides of the tree.
- Glue three blocks together end to end for the bottom of the tree, and two blocks together side to side for the base of the tree.
- Set the sides and bottom up in a tree shape. Glue the sides of the tree to the bottom, using both E6000 and hot glue.
- Carefully stand the tree up and use hot glue to glue the sides together at the top. Give the hot glue a minute to cool, then add more hot glue at each corner, both on the inside and outside, to secure the tree.
- Once the tree seems stable, glue it onto the base using both glues. Allow it to set for at least 4 hours or overnight for the E6000 glue to cure.
- Spray paint tree if desired, allowing paint to dry in between coats.
- Decorate tree as desired.
