flutter sleeve romper sewing tutorial & FREE pattern in size 4T

I made this little romper for my daughter over a month ago with the intention to post it right away – but I really wanted to include a free pattern download so I waited on posting for a few weeks while I got the pattern put together. Then I went on vacation and got absolutely NOTHING done for two weeks (which was wonderful), and here we are, almost done with summer already! So while it’s a little late in the season to post a summer romper, I decided to share it today anyway with hopes that you’ll keep it in mind for next year, or make one now for your little girl to wear with tights and a sweater (unless you’re on the southern half o’the world, in which case it’s nearly spring – hooray!).

FREE pattern for this adorable girl's romper in size 4T and sewing tutorial for other sizes

This romper is based on my flutter sleeve dress tutorialfree pattern for a top or dress in size 4T found here. The romper features the same gathered neckline and fluttered sleeves, which makes it easy to get on and off – since the neckline/shoulderline is gathered with elastic it’s very stretchy and my little girl can step into the romper and pull the sleeves up onto her shoulders all by herself, with no other closures required. This romper version is meant to be made with knit fabric so it’s soft, stretchy, and comfy. I’d recommend sewing up a flutter sleeve dress or top first, so you’re familiar with the basic process. Then try adding shorts to make a romper!


You can download the free pattern in size 4T by clicking here. When you print it, make sure your printer is set a 100% or “full size” – NOT “scale to fit”. It prints on four 8.5×11 sheets of paper, which you should line up as shown below. Don’t trim the paper at all. There is a 1 inch box you should measure to be sure it’s printed properly.


In case your little girl is not a size 4T and you’ve already drafted a flutter sleeve dress in another size, here’s how the main romper piece compares to the dress pattern:


Once you’ve printed your pattern, cut out 2 bodice pieces on the fold and 2 sleeve pieces on the fold (remember to use knit, i.e. stretchy, fabric). You’ll also need 4 shorts pieces (if you’re drafting your own, just use a pair of shorts that fits well as a reference).


As noted on the pattern, there is a slight difference between the shorts front pieces and the shorts back. In the photo below, the shorts back pieces are on the LEFT. The top of the shorts back angles slightly up from the side to the center seam. The shorts from pieces angle slight down from the side to the center seam (as seen on the RIGHT). This gives enough extra room in the back of the shorts for them to be comfortable while sitting.


You’ll want to start by sewing up the bodice of the romper the same way you’d sew up a flutter sleeve dress – follow the directions from the flutter sleeve dress tutorial all the way through, except don’t hem the bottom. (Also, I just hemmed the sleeves on this version instead of adding pom pom trim).

Set the top aside and grab your shorts pieces.


Now you have two legs. Turn one leg right side out, and slide it into the other leg, which is still wrong side out, so the right sides will be together.


Now turn the shorts right side out. You now have a top, and a pair of shorts with now waistband. Keep the shorts right side out, but turn the top inside out. Place the shorts inside the top and right sides will be together. Sew together with a 1 inch seam allowance, stretching top slightly if needed.


Now your romper is all attached together, and all that’s left is to add elastic around the waist. I forgot to get a photo of this step, so we have a fairly laughable illustration instead – but hopefully you can still get the main idea. With the romper inside out, press the 1 inch seam allowance you just made up, toward the top. Sew the seam allowance to the top, right along the edge of the seam allowance, all the way around, leave a 2 inch space. That creates a casing.


Cut elastic just shorter than the waist measurement and thread it through the casing. Sew ends of elastic together, then sew the rest of the casing closed. Hem the shorts and the romper is done!



  1. 1

    Sarah Helene says

    CUTE-AS-CAN-BE “flutter sleeve romper” — LOVE the purple & aqua print. Darling model/daughter in outfit! Certainly LOTS OF MOM’S LOVE sewn into this. Thanks for the detailed instructions and sharp photos in your tutorial with a pattern included. Practical romper for summertime. Sarah Helene in Minneapolis

  2. 2

    Lynne says

    Such a darling pattern (and little model!) Thank you for the great tutorial and pattern. I’m new to sewing with knits and it scares me a bit, but this is so cute, I think I might have to give it a try! Thanks again!

  3. 3


    Hmmmm, I have a girl who can wear a 4T, AND that exact fabric in my stash ! And I’m in blazing TX, so she’ll be able to wear it for months yet. 😉

  4. 13


    Did you finish the neck line and armhole with bias for the knit too? It seems you used elastic on the neckline. I want to sew this today and I am wondering how should I do it.

    • 14


      I just made it and it turned out so big. It fits a 6 year old. I don’t know how to add the elastic on the waist, because I serged the top to the bottom since I used knit (96% viscose and 4% elastane) and my straight machine won’t sew that.

  5. 18

    pepa says

    Hola buenas tardes desde el sur de España,(Galaroza, Huelva)

    Tengo una duda, los margenes de costura ya están incluidos en el patrón o hay que darlos en la tela antes de cortar.

    Gracias. Pepa

  6. 22

    Teresa B. says

    Ok, sorry for all the amazing and experienced sewers out there…LOOK AWAY! So, I’m very new to sewing and wonder if this sort of stitch I see is something that can be done with a regular old sewing machine or do I need one of those fancy “serger” machines? Thanks!

  7. 24

    Laura says

    Thanks for these easy to use instructions! I searched high and low for a pattern and instructions just like these! Thanks for helping me make my first romper for my daughter 🙂 She is really going to be able to rock her thunder thighs this summer!!

  8. 27

    Jenni Howard says

    I love this pattern. One question though, once I started thinking about making this for my daughter, I wonder, when she has to goto the toilet… it may prove challenging? Any suggestions besides putting snaps in crotch area like I do for my babies?

  9. 29

    Fiona says


    I love all your girls patterns. I am wondering if you sell the multi sized pattern for the girls romper outfit.

  10. 30


    I had purchased a Butterick pattern for the shorts only. I thought I followed the pattern guide correctly but found it to be so awful that i went to the internet and by accident I found your instructions for the shorts in this romper. After I read your instructions I was able to complete the shorts in a very short time. I might mention that I had struggled with them for hours. What a relief to read your detailed and simple instructions. I thank you so much. You need to write instructions for the pattern companies. I have been sewing for over 40 years and I have never had so much trouble understanding the verbiage in pattern guides. Thanks again

  11. 31


    I first made the dress for my tiny 3 yo granddaughter. Barely a 3T. Then I made the romper out of jersey. She loves it and wears it to the gymnastics class. The teacher loves it because her blouse doesn’t keep coning up!
    So of course, I had to make another set. dress and romper. Thanks.

  12. 34

    DJ says

    This is adorable! I am fairly new to sewing and I want to make my niece this. By the time spring comes around she will be almost 2. How can I size the pattern down to fit her?


Leave a Reply

Your email address will not be published. Required fields are marked *